McNeilus HD Rear Loader, Руководство оператора

Страница: 104 / 132

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
90
3.4.2 Tailgate Seal
• Daily Checks - The tailgate seal is inspected by the
operator or skilled service personnel.
The tailgate should be open and correctly propped for seal
inspections. See Section 3.8.1 Engaging the Tailgate Prop (No
Tag Axle) or Section 3.8.3 Engaging the Tailgate Prop (With
Tag Axle).
Inspect the tailgate seal for tears, damage, or excessive wear.
Ensure that the seal is fully seated in the tailgate channel.
Clean the tailgate seal as needed. Inspect the mounting straps
to ensure they are secure.
3.5 Operation
Be sure all non-operator personnel are at
least 20 feet (6 meters) away from all areas
of the Packer.
Serious personal injury or death may occur.
WARNING
Make sure the area above the vehicle is
clear of objects and power lines before
raising or opening the tailgate.
Serious personal injury or death may occur.
DANGER
3.5.1 Refuse Vehicle Controls
• Daily Checks - The controls are checked for proper
operation by the operator or skilled service personnel.
Operate all functions to validate they are operational. Verify
that all indicator lights and alarms are operational.
3.6 Trash Behind Ejector
• Daily Checks - The refuse vehicle is inspected for trash
behind the ejector by the operator or skilled service
personnel. Conduct daily checks to the ejector.
CAUTION
When the Packer is operated on the route,
trash can pass by the ejector. If the trash is
not cleaned from behind the ejector, the
Packer can be damaged.
1. Start the chassis engine.
2. Turn the PUMP rocker switch to ON.
3. Extend the ejector far enough to clear the side door.
4. Perform your company’s Lockout/Tagout procedure.
If your company does not have a Lockout/Tagout
procedure, follow OSHA 1910.147 Lockout/Tagout and
1910.146 Confined Space as appropriate.
5. Fold down the ladder (Figure 46, Item 1) (if equipped) to
gain access to the side door.
Preventive Maintenance