McNeilus HD Rear Loader страница 19 Скачать руководство пользователя

Страница: 19 / 132

Rear Loader

Safety

3.0

Product Safety Information

Read, understand, and follow the safety guidelines and

heed dangers and warnings listed below and contained in

this manual as well as on the refuse vehicle itself to promote

reliable operation and prevent serious personal injury.
Contact McNeilus Truck and Manufacturing, Inc. if you require

assistance or have questions.

3.1 Safety

WARNING

Safety decals must be replaced anytime

they are damaged, missing, or cannot be

read clearly. Failure to have proper decals

in place can result in serious injury or

death. If you require safety decals, please

contact McNeilus Truck and Manufacturing,

Inc. at 888-686-7278.

WARNING

The Packer must not be modified in any

way without authorization from McNeilus

Truck and Manufacturing, Inc.

Modifications may not comply with safety

standards, including ANSI safety standards,

and may result in serious personal injury.

Please contact McNeilus Truck and

Manufacturing, Inc. at 888-686-7278 if you

require assistance.

WARNING

Wear Personal Protective Equipment (PPE)

such as hard hats, safety glasses or goggles,

sturdy gloves, hearing protection, steel toed

boots, and snug fitting sturdy long-sleeve

shirt and long pants when operating or

maintaining the Packer. Reflective

clothing is recommended for drivers and

employees while packing during hours of

darkness. Serious injury can result

without proper PPE.

Содержание HD Rear Loader





































































































































Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды

McNeilus HD Rear Loader, Руководство оператора

Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды