MCM Electronics iRIS8+, Руководство по установке

Страница: 9 / 32

Page 9
Description :
The Master code is used to enter and change
the user codes only (no system setups may
be changed).
The Master code may be changed by either
the Technician or by the holder of the existing
Master code. Options : (6 digit entry required)
Any 6 Digits
Function 00 - Master Code
Default - 218572 ( six digits)
Description :
Function 01 allows the programming of
user code 1. This User code is the only
one with a default value but in all other
respects is the same as User codes
02 to 30 Options : (Four digit entry required)
Any 4 Digits (see notes)
Function 01 - User Code 1
Default - 1111 ( four digits only )
Example : While in program mode (Program LED flashing)
Key Sequence Operation
00 - Enter Function No.
218572 - Enter Option (Master code = 218572)
On - Store Entry
Installer may now exit program mode by pressing the OFF button or continue programming by enter-
ing a new function number.
Notes: Ensure the Master code is different to the Technicians code. If the Master code is the same as
the Technician code then the technician will not be able to gain access to program the system func-
tions
Notes:
-
30 User codes may be programmed into the panel, These user codes are programmed
using function numbers 01 to 30, all are programmed in exactly the same manner.
- No two User Codes may be the same and if Keyboard Duress has been enabled by
Function 74 then no two codes can be within 2 digits of each other. eg. if one code is 1234
then the closest a code can be to it is 1236 or 1232, or else an error beep will be heard.
- The User codes are used to Arm, Disarm, Isolate Sections and Test the system only.
- The User codes may be changed by either the Technician or by the holder of the
existing Master code.
- The User codes may be deleted by using the Isolate key in place of the 4 digits in the user
code ( the Isolate key needs to be used only once to delete all four digits of the user code)
then press On key.
Example : While in program mode (Program LED flashing)
Key Sequence Operation
01 - Select User No. 01
2222 - Enter Option (User code 1 = 2222)
On - Store Entry
02 - Select Function No. 02
Isolate - Delete User Code 2
On - Store Entry
Installer or Master code holder may now exit program mode by pressing the OFF button or continue
programming by entering a new function number.