MCM Electronics iRIS8+, Руководство по установке

Страница: 20 / 32

Page 20
Options : (Single digit entry required)
Enter 0 to initiate Learn mode
Enter Isolate followed by On to delete all remotes
Options : (Single digit entry required)
Any sector or combination of sectors from 1 to 7
Function 82 - RF Keyfob Programming
Default - No remotes learnt
Note:
The total number of keyfobs that can be learnt is 7. Individual remotes cannot be deleted.
Learning an 8th keyfob, will overwrite the 7th keyfob. It does not overwrite the 1st keyfob.
If learn is unsuccessful the keypad will give a long beep and the sector led will stop flashing.
If a learnt fob is learnt in a second time....it will simply overwrite itself. It does not take up another loca-
tion or overwrite an existing fob
Example : While in program mode (Program LED flashing)
Key Sequence Operation
82 - Enter Function No.
0 - Enter Option (0 = Initiates Keyfob Learn)
First press - Press any button on the remote
Second press - Press any button on the remote a second time to learn
On - Store Entry (Stores the status of the remotes learnt, learnt re-
motes are stored in the ICON RF Module as soon as the sector light becomes steady, this means if you
press OFF rather than On, the remote will still operate...but it wll not show in Function 81 as being learnt
until the learn sequence is initiated a second time)
Installer may now exit program mode by pressing the OFF button or continue programming by entering
a new function number.
Example : While in program mode (Program LED flashing)
Key Sequence Operation
83 - Enter Function No.
3 - Enter 3 (isolates keyfob 3)
5 - Enter 5 (isolates keyfob 5)
On - Store Entry
Installer may now exit program mode by pressing the OFF button or continue programming by
entering a new function number.
Description :
This function, will allow programming of key-
fobs into the ICON RF Module.
To initiates learn press the 0 key, the first
available sector will flash (if no fobs are learnt
already this will be sector 1) press any button
on the remote, the keypad will beep once then
press the button a second time, if succesful the
keypad will sound 3 beeps and the sector will
become solid. Enter 0 to learn another fob, the
next available sector will flash or press On to
save and exit. Keyfobs that are already learnt
can be tested while in the function by pressing
the button on the keyfob, the corresponding
sector light will flash and the keypad will beep
for 750msec. To Delete all remotes press the
Isolate key followed by On.
Function 83 - RF Keyfob Isolate
Default - No Keyfobs Isolated
Description :
If a keyfob is lost or to prevent access of a
particular keyfob, enter the corresponding
sector from 1 to 7.
Isolated fobs are denied access to arm or
disarm the system only, they are not deleted
from the RF module.