McLaren ARTURA, Руководство пользователя

Страница: 50 / 326

Windscreen wipers
1. Windscreen wiper off
2. Automatic wipe
3. Slow wipe
4. Fast wipe
NOTE: Switch off the windscreen wiper
in dry weather, dirt can cause
inadvertent wiper sweeps which could
damage the wiper blades or
windscreen.
Operating the windscreen wipers
1. Ensure the ignition is switched on.
2. Move the wiper stalk to the required
position.
Automatic wipe
A rain sensor, located on the windscreen behind
the interior mirror, measures the quantity of
water on the windscreen and operates the wiper
at the most appropriate speed.
To select, move the windscreen wiper stalk to
the automatic wipe position
(2) .
The wiper will wipe once. The wipe frequency
then depends on how wet the windscreen is.
Only select the automatic wipe position in damp
weather conditions or when it is raining.
To adjust the sensitivity of the rain sensor, see
Wiper sensitivity, page 4.11.
Slow wipe
Move the wiper stalk to position (3) , to operate
the wiper at slow speed.
Return the stalk to position (1) to switch off.
Fast wipe
Move the wiper stalk to position (4) , to operate
the wiper at fast speed.
Return the stalk to position (1) to switch off.
Single wipe
1. For a slow single wipe, briefly push the
wiper stalk down and release. The wiper
will operate once at slow speed, without
washers.
1.40
Before You Drive
Washers and Wipers
L