McLaren ARTURA, Руководство пользователя

Страница: 286 / 326

Service products
Service products are fuel, engine oil, coolant and
brake fluid. McLaren recommend that you only
use products tested and approved for McLaren.
Damage resulting from using non-approved
service products is not covered by the liability
for material defects.
WARNING: When handling, storing
and disposing of any service
products, please observe the relevant
regulations. Failure to do so could
endanger people and the
environment. Do not allow service
products to come into direct contact
with your eyes or open wounds.
Contact a doctor immediately if any
service product is swallowed.
ENVIRONMENTAL: Dispose of service
products in an environmentally
responsible manner.
Engine oil
9.3 litres Engine oil capacity
McLaren recommend using Gulf Formula Elite
5W-40 (API SP, ACEA C3).
Gulf Formula Elite is an advanced, fully synthetic
oil that provides enhanced deposit and wear
protection. It also offers protection against
possible Low Speed Pre-Ignition (LSPI) in latest
Turbocharged Gasoline Direct Injection (TGDI)
engines.
As per industry standard tests, it can offer up to:
40% more deposit control
1
37% less wear
2
90% better soot handling
3
1 As per industry standard test Seq. IIIH for API
SP
2 As per industry standard test OM646LA for
ACEA C3
3 As per industry standard test DV6C for ACEA
C3
You may obtain further information from your
McLaren retailer.
NOTE: Do not use any lubricant
additives. These could lead to increased
wear and damage to the mechanical
assemblies. Damage caused by
additives, which are not approved, is
not covered by the McLaren warranty.
7.10
Vehicle Data and Glossary
Service Products, Fluids and Capacities
L