McLaren ARTURA, Руководство пользователя

Страница: 261 / 326

Wheels and tyres
WARNING: Have worn tyres replaced
in axle pairs and ensure the tyres are
fitted as specified. With worn tyres,
the driving stability of the vehicle will
be adversely affected, especially
when driving at high speeds.
Consult your McLaren retailer if you
have had new tyres fitted for
information on the appropriate
bedding in time based on your driving
style.
• With new tyres, avoid high speed
cornering and excess speed.
• Only have wheels and tyres of the
same type and make fitted.
• Never use a tyre which has been
punctured and then repaired.
• Only have tyres of the correct size
fitted.
• Tyres degrade over time due to the
effects of ultraviolet light, extreme
temperatures, high loads, and
environmental conditions and should
be regularly inspected, see
Inspecting wheels and tyres, page
6.39.
• Irrespective of distance and
remaining tread depth, it is advisable
to have all tyres checked regularly by
a tyre specialist and consider
replacing the tyres, if required.
McLaren recommend that you only use tyres
with sensors fitted, see Wheel and tyre sizes,
page 7.08. If tyres that do not have sensors fitted
are used, the tyre pressure monitoring system
(TPMS) will not work and a warning lamp will be
illuminated, see Instruments and warning lights,
page 2.05.
These tyres provide the best possible
performance in conjunction with the safety
systems on your vehicle and have been
specifically approved by McLaren.
McLaren cannot accept any responsibility for
damage that may result from use of other tyres
and wheels. Further information about wheels
and tyres can be obtained from your McLaren
retailer.
WARNING: Using tyres other than
those which have been
recommended by McLaren, may
contact the body work and adversely
affect the handling. This may cause
loss of vehicle control, resulting in
serious personal injury or death.
Noise levels and fuel consumption
may also be adversely affected. In
addition, when driving with a load or
when using snow traction devices,
they could cause contact between
the bodywork and axle components.
This could result in damage to the
tyres or the vehicle.
NOTE: Retreaded tyres must not be
used. Do not fit used tyres if you have
no information about their previous
usage.
NOTE: Modification to the brake system
and wheels is not permitted, nor is the
use of spacer plates or brake dust
shields. Any such modifications will
invalidate the vehicle warranty on the
area modified.
6.37
Maintaining Your McLaren
Wheels and Tyres
R