McLaren ARTURA, Руководство пользователя, Страница: 298 / 326

Disassembly of the Sensor and its battery by the
user is prohibited. The lithium batteries inside
the Sensors contain flammable material. The
substances contained in the battery are harmful
and can have a negative impact on human health
and the environment. Improper use of lithium
batteries can cause overheating which could lead
to a fire or explosion, with the risk of personal
injury and/or environmental damage. To avoid
such incidents during use/handling of the
batteries, ensure you observe the following
precautions:
•
Do not dispose of the batteries in fire.
• Do not heat the batteries or expose them
to sources of heat.
• Do not disassemble the batteries.
In the event of improper use of and/or accidental
damage to the battery which causes the
contents to leak out, follow the precautions
outlined below.
•
Inhalation: the fumes can cause respiratory
irritation; leave the area and go to a cool
and well-ventilated location.
• Contact with skin: wash immediately with
plenty of water and seek medical attention,
particularly if any irritation persists.
•
Contact with eyes: wash immediately with
plenty of water for at least 15 minutes.
• Contact with mouth: rinse immediately with
plenty of water and seek medical attention.
In the event of a fault with the sensor and
possible accidental damage to the battery which
causes the contents to leak out, it is
recommended to use appropriate personal
protective equipment (PPE) and follow the
instruction above. According to Art.33 of the EU
Regulation n.1907/2006 (REACH), the batteries
contain the following substances: 1, 2 -
dimethoxymethane; ethylene glycol dimethyl
ether (EGDME) (CAS no: 110-71-4) e 1, 3 -
propanesultone (CAS no: 1120-71-4).
Waste Sorting and Recycling of the Sensors
It is the installer's responsibility to dispose of the
Sensors in accordance with applicable legislation.
Incorrect disposal of materials can lead to
penalties in accordance with applicable
legislation. Separating waste and recycling
contributes to the preservation of natural
resources and ensures correct recovery of
materials, helping protect human health and the
environment.
Sensors on worn tyres must be removed from
the tyre and disposed of in accordance with
applicable legislation. For further information on
the methods and locations for disposing of used
Sensors, contact Pirelli at:
disposal.cyber@pirelli.com
The crossed-out wheelie bin symbol on the
Sensors indicates that the Sensors and the
batteries contained in them must be disposed
of separately, and NOT with unsorted urban
waste.
8.04
Conformity Information
Compliance
L