PBXgateway II Quick Installation Guide
41
4. Program
KEY 00
as SCR (Single Call Ringing). This TN must have a
CLS of FLX
D
, CPT
A
, VCE,
WTA.
5. Assign a voicemail box for this TN.
WARNING: Do not configure a key as Message Waiting Key (MWK) for this TN to prevent
interference with voicemail and call routing functions.
6. Program any of the first 10 keys to allow A06 (Conference) & TRN (Transfer). Remember these settings when
programming the RemoteConneX PBXgateway.
Provisioning the Secondary Data Channel of the Mobile Phone’s TN – Ch2
1. On the Meridian maintenance terminal, use the
>LD 11
to add Analog Terminal Adapter (ATA)
functionality to this TN. Refer to
Meridian 1
documentation for more details on programming an ATA.
Although no ATA adapter is used for the RemoteConneX application, the programming required for
the ATA device applies to the mobile phone’s TN configuration. The ATA functionality must be added
to the Ch2 channel.
Tech Tip
: Nortel’s Reach Line cards do no support the secondary channel
required for the MobileConneX application.
2. This TN must have a
CLS of FLX
A
, CPT
D
, VCE, WTA
.
Tech Tip:
If Ch1 is “TN 3 0 5 0” (loop 3,
shelf 0, card 5, unit 0), then Ch2 would be “TN 3 0 5 16”.
3. Program
KEY 00
as Single Call Ringing SCR yyyy. The “yyyy” field should contain the Directory
Number (DN). The SCR appearance MUST be DID capable to allow the mobile user to dial the
Directory Number to access the corporate PBX.
4. Done. The Meridian 1 PBX is now configured to support
one
user.
