PBXgateway II Quick Installation Guide
32
Connecting to the Mobile EXTender
This page provides the necessary information to configure the PBXgateway II with the Mobile EXTender.
This software feature allows the routing of incoming calls bounded to road warriors’ offices to their cellular
or analog phones, and allows these employees to access most commonly used PBX features from
anywhere.
Associated Voice
The PBXgateway II is capable of utilizing the second PBX channel (CH2) associated with each phone
port to carry the “associated voice” for the Mobile EXTender. The Norstar system does not support
secondary channels. It is necessary to configure another digital port as a Trunk port to carry associated
voice.
Note: The Mobile EXTender is supported by the DEFINITY, Meridian and Norstar protocols only.
Prerequisites for Configuration
The PBX B2 channel (CH2) associated with the port assigned to the Mobile EXTender, MUST be con-
figured for analog voice. (Refer to the PBXgateway II System Administrator’s Guide for more information)
Any cellular or analog phone.
Configuration Items
The following parameters need to be configured on the PBXgateway II. Refer to the PBXgateway II
System Administrator’s Guide for complete set up information.
You must…
To…..
Default
Settings
Set the CH2 Mode
parameter
Set CH 2 to carry the associated
Voice
. <Default>
Set the Mobile EXTender
parameters
•
Enable the Mobile EXTender.
•
Set the Dialback Mode of operation.
•
Set the Dialback Number.
•
Assign Transfer and Conference keys to your telephone.
-
Norstar Only
You must…
To…..
Default
Settings
Set a Mobile EXTender
Trunk Port
Set a KSU port to carry the associated voice
-
Set a Mobile EXTender
Client Port
•
Enable the Mobile EXTender
•
Set the Dialback Mode of operation
•
Set the Dialback Number
•
Assign Transfer and Conference keys to your telephone
-
