PBXgateway II Quick Installation Guide
36
value to zero to disable the Idle Timeout. Values 0-192.
Min Password
Length
This parameter ensures the minimum length of the ConneX login
password for security purpose. Also, it provide the following feature for a
newly configured user:
The System Administrator can assign a ConneX user with an initial
password by entering a value in the Password field of the Port Menu.
Also, the Administrator can let the ConneX user enter their own
password by configuring the 'Min Password Len' parameter. When the
user first attempts to access the ConneX port from their remote phone,
they will be prompted to enter a password with the specified length.
Note: The minimum value for this field is 2 (maximum is 9). To disable
the limitation of password length, leave the field blank.
Norstar KSU ConneX Configuration
This section illustrates two variations of Norstar KSU settings to enable ConneX functionality on the
PBXgatway II:
1. Line Assignment Method – ConneX configuration with no digital set and one remote client.
2. ConneX Session Port – Bridged or Ghost configuration when the ConneX client acts as a ghost
set receiving calls targeted to an actual desk set (either extended from a Remote EXTender or
directly connected to the KSU)
Trunk Port KSU Configuration – Line Assignment Method
The Trunk Port is restricted to one Intercom Key assignment and no line appearances to ensure correct
operation. If the user is required to login via the link from an external set either Direct Ring Transfer of a
Target Line to the port should be used. The link can also be reached externally via a call to the Company
Directory if an Automated Attendant is configured. The user can login internally via the port DN at any
time.
Terminals and Sets
1. Enable
Line Pool Access
for outdialing (PRI or Pool).
2. Set
Prime Line
to
I/C
, with a minimum or 1 I/Cs assigned.
3. Set
Answer DN
to
None
.
4. Set
Foreward on No Answer
and
Forward on Busy
to
None
.
5. Set
Do Not Disturb
on Busy
to
N
.
6. Set
Handsfree
to
None
.
7. Set
Allow Redirect
to
Y
and
Redirect Ring
to
Y
.
Lines
1. Under
the
Target Line
assigned in
Terminals and Sets
, set the line to
Public
.
2. Set
Received Number/Digits
to a number in the range included in the PRI trunk.
3. Set
If Busy to Prime
and
Prime Set
to the
DN
of the set configured in Terminals and Sets. Ensure
that you enter a unique DN for each ConneX user. Duplicating a number will cause problems when
two or more users, assigned the same DN, attempt to login simultaneously.
4. In
System
Programming set DRT to Prime
to
Y
(system-wide setting – if this setting was performed
when setting up the Link then no action is required).
Bridged Appearance– ConneX_Session Port as Ghost Set
The incoming call will ring at both the desk set and at the remote set. The call will be dropped at the
unanswered set when answered at the other set.
The desk set that is bridged to the ConneX_Client port is configured as a normal set with no special
programming required. The Answer DN setting in the ConneX_Client programming handles the call
process for the bridge from the desk set. Voice mail should be configured on the desk set in this
situation.
