EXTender 6000 Quick Installation Guide
38
Setting up the Analog Port
Note: The analog line card is not available outside North America.
The EXTender 6000 may be equipped with an extra RJ-11 port on the back panel. This port is labeled
“Analog” and it provides a connection to an analog telephone line (pro-vided at the remote location) for
the purpose of placing local or emergency calls.
Once the unit is connected to the analog line, the remote user simply presses the assigned key on the
digital telephone and dials the telephone number. Only one remote user can dial out at any one time.
IMPORTANT NOTE:
If power to the remote unit fails, the Analog port is not available to the digital
telephones. If another telephone tries to use the analog line while it is busy, it hears a “Busy” tone.
Procedure
1. Select Analog command using the following path:
Path:
Remote->Configuration->Analog Card
The following menu appears:
Figure 25: Analog Port Setup
2. Press
the
Æ
key to enable analog port access for all 12 ports, or press the
↓
key to set individual
ports.
Note: This procedure sets the <Default> setting for all ports.
Figure 26: Default Port Settings
3. Press
the
Æ
key to enable or disable the analog port.
4. Press
the
È
key to set the numeric “key”, which must be pressed on the remote telephone before
placing an analog call.
