20
CR16 Front Panel Displays, Push-Buttons and Switch
Disables the
control opera-
tions of acces-
sory compo-
nents in any
Zone
Program an ac-
cessory turn-on
command when
that source is
selected
LED is on when the
AC power cord is
connected to a live
AC outlet, and the
front panel POWER
switch is turned to
ON
The LED Displays
indicate what signal
sources have been
selected for each
Zone
Mutes or unmutes
audio in any Zone
that is turned-on
Selects the Zone
you wish to control
or program
Turns all AC
power on or off
Resets all CR16
microprocessors
Select any one of the Audio
or Audio/Video signal
sources for use in any Zone
Turns off the entire
McIntosh Audio/
Video System
Issues a transport
play command
when that source
is selected
The digital display indi-
cates the % (Percent) of
the maximum volume for
the zone selected. After 10
seconds the display reverts
to the volume setting for
Zone 1
Adjust the
volume level
up or down in
any Zone
Turns on or off a
specific Zone to
operate or to allow
programming
The LED indicates
if the mute func-
tion is active for
the Zone selected
The LEDs indicate
which Zones are
turned-on
IR Sensor receives
commands from a
remote control
The LEDs indicate which Zone
has front panel control and when
it is in the programming mode
The LED indicates if the
zone selected has the ac-
cessory control off com-
mand programmed
The LED indicates if
the Zone selected has
the accessory on com-
mand programmed
The LED indicates if the
Zone selected has the
transport play command
programmed
