9
Rear Panel Controls, Connections and Switches
Connect the CR16
power cord to a live
AC outlet. Refer to
information on the
back panel to deter-
mine the correct
voltage
EXT (external)
SENSOR for a
McIntosh Key-
pad or IR sensor
DATA PORTs send
signals to compatible
source components to
allow for remote con-
trol functioning
PWR CTL sends
a turn-on signal
to a McIntosh
Component
BALANCED
OUTPUTS
send signals to
power ampli-
fier inputs and
the switch that
selects Fixed
or Variable
Outputs
HOME Data Port
connects to the op-
tional HC-1 Home
Controller
UNBALanced
OUTPUTS feed
signals to power
amplifier inputs
AUDIO INPUTS accept
signals from the outputs
of source components
BASS and TREBLE
controls provide
±12dB adjustment
from the flat center
position
TO NEXT CONTROLLER
connects to the next CR16
Controller Input B
CONTROLLER INPUT A connects
to a McIntosh A/V Control Center
Dedicated Local
Zone Audio/
Video Signal
Source
Keypad connector
allows use of
WK-3 or WK-4
keypads
Level control
provides ± 6dB
adjustment, for
the maximun
volume level,
from the center
position
MULTI-CHANNEL
AMP connects to a
McIntosh multi-chan-
nel power amplifier
MULTI-CHANNEL
connector which
sends a turn-on sig-
nal to a McIntosh
multi-channel power
amplifier
RS232 connector
for use with an
external control
system
VIDEO INPUTS
for Video signal
source components
VIDEO OUTPUTS to send video
signals to another CR16 or to a
McIntosh Control Center
POWER
CONTROL
Outputs send
turn-on signals
to a McIntosh
Power Con-
troller
VIDEO OUT TO
MONitor sends a
video signal to a
monitor/TV
CONTROLLER INPUT B
connects from a previous
CR16 Controller or McIntosh
A/V Control Center
