manualshive.com logo in svg

McHale Twiner, Инструкция оператора

Поделиться
Скачать
McHale Twiner Скачать руководство пользователя страница 9

McHale

 Twiner

9

3

Specific safety warnings

3.1  Electronic safety warnings

This machine is equipped with electronic parts and components which comply to 
the EMC directive 2014/30/EU but still may be influenced by electromagnetic 
transmissions of other apparatus, such as welding machines, etc.

Check electric cables regularly for signs of breakage or wear. If in doubt 
always replace.

Do not modify any safety circuits (faulty safety circuits will cause risks).

3.2  Hydraulic safety warnings

The maximum pressure in the hydraulic system of this machine should not 
exceed 210 bar.

Always ensure the system is not under pressure before working on the 
machine. Oil under pressure can penetrate the skin and cause injury. Beware 
of pipes under accumulator pressure, depressurise lines by unthreading 
connections extremely slowly.

Hydraulically actuated devices must be blocked mechanically against 
movement, before working on the machine.

If any hoses are removed or replaced ensure they are marked and re-installed 
to the correct position during re-assembly.

Do not work on hydraulic systems unless you are qualified to do so. This work 
should only be carried out by qualified persons or your 

McHale

 dealer.

3.3  Noise level

The European Regulation 2003/10/EU directs employers and employees to 
control the noise level at work. The noise level at field work may differ 
according to the tractor, ground, crops and other environmental conditions.

In normal conditions, whilst driving the machine, the noise level to the driver’s 
ear does not exceed 70 dB (A) with the rear screen of the tractor cabin open. 
The common noise level of the machine and the tractor is primarily influenced 
by the tractor noise (radio is an additional noise source). It is recommended to 
operate this machine with closed cabin windows.

Содержание Twiner











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды