manualshive.com logo in svg

McHale Twiner, Инструкция оператора

Поделиться
Скачать
McHale Twiner Скачать руководство пользователя страница 6

McHale

 Twiner

6

1

Introduction

This manual is for twine only and should be read in conjunction with the variable 
chamber baler operator manual (CLT01141). The 

McHale

 Twiner is designed to fit a 

variable chamber baler, to bind round bales with twine, as an alternative to net.

 

The 

design has been developed based on years of extensive research and development in 
the field of round balers. Given proper care and attention, the machine will provide 
years of reliable and dependable performance.

Please do not assume that you know how to operate and maintain your machine before 
reading this manual carefully. In order to prevent misuse, damage and accidents, it is 
very important that everybody who will operate the machine is a fully trained operator. 
They must read and fully understand all of the contents of this manual, before operating 
the machine, paying particular attention to the following:

Safety instructions

Functions

Controls (hydraulic & electrical)

It is highly recommended to get acquainted with any new machinery slowly. Take time 
to learn and understand all of the features of the machine. Proficiency will increase as 
more experience is obtained.

If you have any questions in relation to the instructions in the manual, please contact 
your 

McHale

 dealer. It is highly recommended that training be sought from your local 

McHale

 dealer.

The operator is solely responsible for the safe use and maintenance of the machinery, 
in accordance with this manual. Keep this manual safe and make sure it remains with 
the machine, at all times.

Содержание Twiner











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды