manualshive.com logo in svg

McElroy TracStar 250 2 Auto Series, Руководство оператора, Страница: 20 / 86

Поделиться
Скачать
McElroy TracStar 250 2 Auto Series Скачать руководство пользователя страница 20

Insulated Heater Stand/Shroud

The heater should always be stored in the insulated heater stand, 

heater shroud or blanket for protection of the operator and to 

minimize heat loss and risk of mechanical damage.

TX00363-9-15-94

Overview

2 - 6

Heater Stripper Bar (Top Loading Heater)

The heater is equipped with a stripper bar that is used to separate 

the heater from the pipe ends after the heating cycle. When the 

inner jaws are opened, the jaws lift and press against the stripper 

bar separating the heater from pipe ends.

TX05355-04-09-18

CD017

99-0

8-17

-16

CD0

20

25-0

3-06

-17

Power for Heater

The heater cord plugs into the receptacle on the frame.
There is a voltage meter above the receptacle that displays the output 

voltage.

TX05289-04-12-17

CD018

63-0

4-12

-17

Pipe Lift Controls

Hydraulic pipe lifts are used to aid in positioning pipe in the 

machine.
The pipe lift control bracket can be loosened and rotated down 

from the vehicle to allow clearance to fuse tees or elbows.

TX05164-04-06-17

CD018

65-11-

29-16

Содержание TracStar 250 2 Auto Series























































































Отзывы:

Нет отзывов