Safety
1 - 5
Electrical Safety
Always ensure equipment is properly grounded. It
is important to remember that you are working in
a wet environment with electrical devices. Proper
ground connections help to minimize the chances
of an electric shock.
Frequently inspect electrical cords and unit for damage. Have
damaged components replaced and service performed by a
qualified electrician.
NOTICE
: Always connect units to the proper power source as listed
on the unit, or in the owner's manual.
NOTICE
: Disconnect the machine from the power source before
attempting any maintenance or adjustment.
Disconnect the machine from the power source
before attempting to service the control
panel. Failure to disconnect the power
could result in serious injury or death
due to electric shock. Refer service to a
qualified technician.
TX03003-3-30-11
¡ATENCIÓN!
¡ATENCIÓN!
WR000
55-
4-
7-9
3
WR000
25-11-
30
-9
2
Crush Points
Hydraulically operated equipment operates
under high pressure and generates extremely
high forces. Anything inadvertently caught in
the machine will be crushed. Keep fingers, feet,
arms, legs, and head out of the machine while
operated. Always ensure machine power is off
before entering the machine for any reason.
TX03004-04-18-16
WR00012
-12
-4
-9
2
¡ATENCIÓN!
Facer Blades Are Sharp
Facer blades are sharp and can cut. Never attempt
to remove shavings while the facer is running, or is
in the facing position between the jaws. Use care
when operating the facer, and when handling the
unit.
NOTICE:
Turn machine off, disconnect machine power, and remove
the facer blades before attempting any maintenance or adjustment.
NOTICE:
Never extend the facer blades beyond the inner or outer
circumference of the facer.
TX02378-04-18-16
WR000
73-
4-6
-9
3
¡ATENCIÓN!