Powered Assist Setup
5 - 1
Connect Power Assist to Machine (Optional)
The optional PolyHorse Powered Assist can be connected to the fusion machine's hydraulic system to power the
pipe roller on the PolyHorse. The Powered Assist is used to aid in moving pipe in and out of the fusion machine by
powering the front pipe roller and has controls to raise and lower the pipe.
Connecting to Machine:
Ensure that there is no pipe on the PolyHorse.
NOTICE:
Removing the support assemblies may cause the PolyHorse to tip with pipe on the PolyHorse.
Remove the Pivot Roller Support Assembly from the PolyHorse truss assembly.
Attach the Power Assist Roller to the front of the PolyHorse truss assembly closest to the fusion machine. The Power
Assist Roller connects to the truss assembly in the same way as the Pivot Roller Support Assembly.
Ensure the fusion machine is off, disconnect the hydraulic hoses (A) from the fusion machine's facer
Connect the machine's facer hoses to the tee connections (B) at the end of the hoses (C) from the PolyHorse Power
Assist.
Connect the hoses from the tee connections (B) to the fusion machine's facer (D).
TX03029-9-29-09
PH
04
00
9-10
-13-0
9
D - Hoses from Tee
Connection to Facer.
C - Hoses from PolyHorse
Power Assist.
A - Hoses from Machine
to Facer.
B - Tee Connections.
