3 - 2
Initial Setup
Truss Assembly Positioning
Position the truss assemblies with the pivot lift roller assembly on the left end.
Truss assemblies should be positioned approximately 15 feet apart for 50 to 40
foot lengths of pipe. For shorter lengths of pipe a closer spacing can be used.
Additional truss assemblies can be used to provide support if conditions warrant.
Set up on solid ground if possible. In soft ground conditions it may be necessary to
place screw jack assemblies on a large base to spread out the load and help prevent
Polyhorse from sinking into the ground when loaded with pipe.
TX02687-12-6-06
PH
03
30
2-10
-16
-06
