Cutting Pipe Bands
Do not stand within the danger area of the PolyHorse while
pipe is on or being loaded on to PolyHorse.
Always cut pipe bundle from the stanchion side of the PolyHorse with stanchions in place. Stanchions will prevent
injury by not allowing pipe to roll towards the operator. If bundles cannot be reached from the rear then cut the
bundles from the front of the PolyHorse standing outside of the roller assemblies.
NOTICE:
Only single stack pipe bundles on the roller side of the PolyHorse.
Cut only single stacked bundles from the roller side of the PolyHorse, and only without pipe in the roller.
When it is necessary to cut bands from the roller side, cut all the inner banding on the pipe bundle then cut the outer
two bands last. Use caution when cutting the last bands
TX02697-12-6-06
CUT B
ANDS HERE
CUT B
ANDS HERE
Stanchion
Outer
Band
Outer
Band
Inner
Band
CD00
73
0-12
-6
-06
¡PELIGRO!
DANGER
HAZARD
AREA
AREA
CD00
731-12
-6
-06
Pipe Handling
6 - 2
