Oper
ation
Fusion Outlet
4 - 3
Operation - Fusion Outlet
Hornet™ XL
Drill Main Pipe
The drill adapter is used with a hole saw to drill a hole in the
main pipe.
Insert Drill Adapter in Carriage:
1)
Attach drill (not included) to the drill adapter. Refer to
the
“Attach Drill to Drill Adapter”
for installation procedure.
2)
Install a hole saw (not included) that matches the fitting
size to be fused. Contact fitting manufacturer for hole
saw recommendations.
3)
Ensure the 63mm pipe inserts are installed in the jaws
of the carriage. Unlock the brake on the carriage and
open the carriage completely then lock the brake.
Insert the drill and drill adapter in the lower jaws of the
carriage. There are two steps in the drill adapter and
each one will rest in the pipe inserts. Close the jaws
and tighten the clamps to secure the adapter in the
carriage.
4)
Unlock the brake on the carriage. Pull the trigger on
the drill and close the carriage toward the main pipe.
Apply extra pressure as needed to advance the hole
saw into the main pipe. Drill until the hole saw cuts
through the pipe wall completely.
5)
Release the drill trigger and open the carriage
completely and apply the brake.
6)
Open the jaws of the carriage and remove the drill and
drill adapter.
CD02454-02-27-19
CD02455-02-27-19
CD02456-02-27-19
CD02458-02-27-19
Hole Saw
CD02453-02-26-19
Steps on Adapter
Содержание Hornet XL ASW31401
Страница 29: ...Storage Transport 6 2 Storage Transport Hornet XL Hornet XL Storage Case with All Items Stored ...
Страница 33: ...Notes 9 1 Notes Hornet XL NOTES Notes ...
Страница 34: ......