McElroy Hornet XL ASW31401, Руководство оператора

Страница: 21 / 34

Oper
ation
Fusion Outlet
4 - 4 Operation - Fusion Outlet Hornet™ XL
Insert Fitting
The fitting adapter secures the position and orientation of the
fitting in the carriage for 63mm - 125mm fittings.
If pipe is pupped to the fitting, the fitting can be clamped using
Acrobat™ pipe inserts instead of the fitting adapter.
For 160mm fittings the adapter is not required and the fitting
can be clamped directly in the machine.
Insert Fitting Adapter in Carriage (63mm to
125mm Fittings):
1) Open the jaws of the carriage.
2)
Install a fitting puck for the size fitting to be fused.
3) Ensure the 63mm pipe inserts are installed in the jaws
of the carriage. Insert the fitting adapter in the lower
jaws of the carriage. There are two grooves on the
adapter one for 110mm - 125mm fittings and the
other for 63mm - 90mm fittings. Ensure the adapter is
inserted with the appropriate groove in the lower jaw
closest to the main pipe. Close the jaws and tighten the
clamps to secure the adapter in the carriage
4)
Insert the fitting over the fitting puck and against the
backing plate of the adapter.
5) Close the carriage and bring the fitting next to the main
pipe.
6)
Adjust the fitting by rotating it to align the curve of the
fitting to the curve of the main pipe.
7) After alignment, tighten the fitting adapter clamp knob
to secure the fitting.
8)
Clean the fitting where the fitting will make contact with
the main pipe.
CD02450-03-15-19
CD02452-03-15-19
CD02459-03-15-19
Fitting Puck
110mm - 125mm
Fitting Groove
63mm - 90mm
Fitting Groove
CD02451-02-26-19
Fitting
Fitting Adapter
Clamp Knob
Curve of Main
Pipe
Curve of Fitting