McElroy DataLogger, Руководство оператора

Страница: 32 / 39

6 - 2
Recharging Batteries
Computer
To recharge the unit select the DAP plug-in charger marked
"DataLogger Computer" and plug the cord into the connector on
the bottom of the handle . Plug the charger into an electrical
outlet with the correct voltage for the charger you are using. The
unit will come on when the charger is connected and you cannot
turn it off with the <Blue, F1> keys. It may take a few seconds for
the batteries to charge to a level sufficient to turn the unit on.
Printer
To recharge the printer select the EXTECH plug-in charger marked
"Printer" and plug the cord into the connector on the side of the
printer. Plug the charger into an electrical outlet with the correct
voltage for the charger you are using.
NOTICE: Use only the battery charger provided. Other chargers
with the incorrect voltage, current, or polarity may result in
damage to the unit.
Battery Life
The batteries can be recharged many times. If you find that they
are not lasting for the normal period (at least 8 hours) after
having been recharged, it is time to change them. In order to
avoid problems, we strongly suggest that you replace the batteries
once a year.
To maintain battery efficiency at optimum levels, we suggest that
you periodically leave the unit on until the batteries are fully
discharged. You can do this by leaving the unit on continuously
until the unit automatically shuts off due to low battery charge.
TX01380-4-15-99
Maintenance and Troubleshooting
PH01578-4-15-99
PH01591-4-15-99