McElroy DataLogger, Руководство оператора

Страница: 18 / 39

Unlisted Machines
A list of machines are programmed into the DataLogger
™
for
selection. If your machine is not on the list, you may enter the
name of the machine. To enter a machine, scroll to UNLISTED
from the Select Machine menu and press enter. Enter the machine
description or name using alphanumeric keys. This is an optional
field. If you do not wish to enter a name, press - and ENTER to
enter a blank for the machine name.
5 - 1
Getting Started
Turn the unit on by pressing F1. In a few seconds the display screen
will appear. If this is the start of the job, press BKSP until you see
screen 000. The screens are numbered in the upper left corner.
Use the following function keys to select data units:
Press 6 to select a pressure unit (PSI, BAR, or Kg/cm2).
Press 7 to select temperature unit (F or C)
Press 8 to select date format (month/day/year or day/month/year)
Press 9 to select decimal point (. or ,)
Select the appropriate language using the numeric key pad.
From the Main Menu screen, check the date and time. If either is
incorrect, select the System Menu by pressing 3 and select SET
CLOCK from the menu. Follow the instructions on the screen to set
the date and time. Press
ENTER to return to the Main Menu.
From the Main Menu select LOG DATA.
Follow the instructions on the screen to enter the machine and job
setup data.
TX01367-4-15-99
Piston Area
Piston area is required to determine recommended gauge
pressures. Machines listed in the DataLogger
™
Select Machine
menu have piston area values assigned to them. If an unlisted
machine is selected, the piston area must be entered to calculate
gauge pressure. However, pressure calculation is not mandatory.
Leaving the piston area and the piston area unit entries blank,
skips all the prompts for interfacial pressure entries.
To enter piston area, type in the piston area value in desired
units, then select the units in the next screen.
Operation
TX01368-4-15-99
TX01369-4-15-99
0 0 0 S e l e c t L a n g u a g e :
< 1 > E n g l i s h
< 2 > E s p a ñ o l
U s e n u m e r i c k e y s .
< 6 > P S I < 7 > ° F
< 8 > M / D / Y < 9 > 1 . 0
102 Select Machine:
Unlisted
Use < > and < >
Press <YES> to select
108 Enter Piston
Area:
New:
4.710
Use numeric keys.
Press <ENTER> when done