McDATA Eclipse 2640 SAN, Руководство по администрированию и настройке

Страница: 92 / 276

4
4-14
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring iFCP Connections
Configuring iFCP Connections
To configure an iFCP connection, configure a TCP port (13-16) as
iFCP, as described in
Configuring TCP Ports for iFCP
on page 4-4. A
pair of SAN Routers connects two mSANs. Each mSAN is identified
by a unique mSAN ID and each has its own mSNS. Only configure a
mSAN ID when iFCP is being used. Otherwise, there is only a single
mSAN.
To configure the SAN Router for iFCP connections, select the
following options from the
Configuration
>
iFCP
tab:
• Select
Setup
to configure the mSAN ID for the iFCP function.
• Select
Remote Connections
to configure connection-specific
parameters. refer to
Configure Remote iFCP Connections
on
page 4-15.
Configuring iFCP Setup
To configure the SAN Router for iFCP connection, follow these
instructions:
1. Select
Configuration
>
iFCP
>
Setup
to display the
iFCP Setup
dialog
box ( Figure 4-5 ).
Figure 4-5
iFCP Setup Dialog Box
2. Optionally, change the
Active on next reset
mSAN ID.
• A new mSAN ID takes effect when you reset the system. Thus,
two IDs are shown: the ID currently in effect and the ID that
will be used after you reset the system.