McDATA Eclipse 2640 SAN, Руководство по администрированию и настройке

Страница: 191 / 276

7
Configuration, Firmware, and System Log Maintenance
7-5
Upgrading bootrom (E/OSi)
Upgrading bootrom (E/OSi)
You can use the CLI or Element Manager to download and install
bootrom to the SAN Router. The following instructions are for using
the Element Manager.
1. To determine if the bootrom installed on your system requires an
upgrade:
• Select
Configuration
/
System
/
Properties
to display the
System
Properties
dialog box. Check the version number in the
Boot
ROM version
field.
• Compare the bootrom version number to the bootrom version
in Table 7-1 for the E/OSi firmware installed on your SAN
Router.
2. If you need to upgrade the bootrom to match your current E/OSI
firmware, select
File
>
Firmware Upgrade
.
The
Firmware Upgrade
dialog box appears ( Figure 7-1 on
page 7-2).
3. Enter or edit the TFTP server IP address where the
bootrom.bin
file is stored.
4. Enter or edit the fully qualified path and file name on the TFTP
server for the new bootrom.bin file.
5. Click
Download
.
6. When the download completes, do not click
Activate
on the dialog
box. Instead, reset the SAN Router. This will activate the new
bootrom with the current version of E/OSi firmware installed on
the system.
To reset the SAN Router, select
Reset System
from the
File
menu.
When the
Reset Options
dialog box displays, select the first option
to
Reset System
.
Table 7-1
SAN Router E/OSi and bootrom Versions
E/OSi Version bootrom Version bootrom File Name
4.6 v1.0.3 ECP2k103bootrom.bin
4.7 v1.0.3 ECP2k103bootrom.bin