McDATA Eclipse 2640 SAN, Руководство по администрированию и настройке

Страница: 41 / 276

2
Configuring System Basics
2-17
Configuring IP Addresses
The Figure 2-5 shows the role and position of each IP address relative
to the internal and external IP networks.
The Router Inband IP Address
The router inband IP address is used for the internal delivery of
storage traffic.
To configure the SAN Router inband address, use
Configuration
>
System
>
Inband Address
in the Element Manager.
Figure 2-6
Inband Address Configuration Dialog Box
The iFCP/iSCSI Port IP Address
The “external” iFCP/iSCSI port IP address is used to open and
terminate TCP connections that transport storage data over the
external IP network. Storage traffic received at the iFCP/iSCSI port IP
address can be either delivered to a device directly attached to the
SAN Router or to another SAN Router somewhere in the internal
network.
The iFCP/iSCSI port IP address is configured as the
IP address
in the
iSCSI/iFCP Parameters
section of the
Port Configuration
dialog box
( Figure 2-7 .)