McDATA Eclipse 2640 SAN, Руководство по администрированию и настройке

Страница: 104 / 276

4
4-26
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Example Configurations and Procedures
2. Enter the default
Modify
password (private) in the field provided
and click
OK
.
3. When the Element Manager window appears, select
Configuration
>
System
>
Inband Address
to change the SAN Router’s
inband address parameters.
• Set the inband address to 192.168.20.131.
When you change the
Inband
IP
address
, you must reset the SAN
Router before you can configure the iFCP port.
• Leave the gateway at 0.0.0.0 and click
OK
.
4. Select
Configuration
>
Ports
>
FC/Ethernet
and select port 13 to
configure the Remote SAN Router’s iFCP port.
• Select
iFCP
under
iSCSI/iFCP Parameters
, and enter the
following:
• Port IP- 192.168.27.131
• Subnet Mask- 255.255.255.0
• Next Hop Gateway Address: 0.0.0.0
• Internal Address: 192.168.20.132
• Click
OK
.
5. Select
Configuration
>
iFCP
to display the
iFCP Setup
dialog box.
• Type
131
for the Local mSAN ID and click
OK
.
6.
Select File
>
Save Configuration
and click
OK
.
7.
Select File
>
Reset System
and click
OK
.
8. Verify in the Element Manager if the iFCP port is up and showing
a TCP icon on the port, with a green port outline after the SAN
Router comes up again.
9. Log into the Element Manager for the SAN Router with the
192.168.12.130 address.
10. Enter the default
Modify
password in the field provided (private)
at the login prompt and click
Login
.
11. When the Element Manager appears, select
Configuration
>
System
>
Inband Address
to change the SAN Router’s
inband IP address.
• Set the inband address to 192.168.17.130.