Installation and use
SEEDER MONITOR MCK 1200
8
�
Connect the power cable (A) of the Monitor to the 12Vdc battery of the vehicle;
connect the RED wire to the positive pole (+) and the BLACK wire to the
negative pole (-).
3.2 How to install the sensors
The MCK 1200 Computer is equipped with 2 types of sensors:
�
speed sensor (always present) cod. 481;
�
photocell sensor (always present) cod. 4228, 10FOT-1269, 10FOT-
SEMIMINUTI-0001.
3.2.1 How to install the speed sensor D.18 cod. 481
You can install the speed sensor (cod. 481) anywhere there is a mechanic
movement, in the wheel (front or rear wheel) of the agricultural vehicle/machine, or
by making a metal reference which sticks out of at least 7 mm (Figure 2 - ref. <C>).
We recommend to install the speed sensor inside the wheel, by placing the head
sensor opposite the rim bolts (Figure 2 – ref. <A>).
Adjust the distance between the sensors and the bolts to about 2/3 (Figure 2 – ref.
<B>).
Fix the sensor holder bracket (supplied) to a fixed part of the vehicle/machine so
that it is well fixed to the structure. Lock the sensor to the bracket with the nut and
lock nut.
Warning
We recommend to protect the sensor cable with a rubber sheath.
Figure 2. How to install the speed sensor cod. 481.
Speed sensor
Inner side of wheel
Metal reference
