Installation and use
SEEDER MONITOR MCK 1200
11
3.3 Front view
Figure 1. Front view.
The front panel allows the operator to display all the data of the working cycle. The
following elements can be distinguished:
REF.
DESCRIPTION
A.
“ha PART” e “+” key : it shows the partial area worked in hectares
(range: from 0.01 to 999.9 ha); during the programming phase, it
increases the displayed value.
B.
“WIDTH – PROG “ key : it allows the operator to display and change the
working width.
C.
“ha TOTAL” e “-“ key : it shows the total area worked in hectares
(range: from 0.01 to 999.9 ha); during the programming phase, it
decreases the displayed value.
D.
Liquid crystal display : it constantly shows the rows status and data
requested by the switchboard.
E.
“ON – OFF” key: its switching on is shown by the corresponding green
led.
A
B
C
D
E
LOGO
1
2
3
4
5
6
7
8
9
10
11
12
PR
O
G
. 2
"
IMP/100M
MCK 1200
