Installation and use
SEEDER MONITOR MCK 1200
7
3. How to install the system
3.1 Wiring attachments
MCK 1200
6
3
4
5
1
2
12
9
10
11
7
8
Figure 1. Wiring attachments.
�
Connect the signal cable to the junction box placed on the seed drill;
�
connect the speed sensor “VEL” and the photocells;
�
Insert the connector of the photocell fitted on the 1st element of the seed drill
onto the connector of cable“1”. N.B.: The “first” element of the seed drill can be
considered the one on farther right or left, according to your requirements.
�
Insert the connector of the photocell fitted on the 2nd element of the seed drill
onto the connector of cable“2”, and so on until the final element of the seed
drill.
VEL
Speed
sensor
Power cable
PHOTOCELLS
A