Installation and use
SEEDER MONITOR MCK 1200
15
6.2 Programming the “C” parameter (pulses / 100 metres)
To program “C” parameter press “width - PROG” (ref. B, fig. 1) and “ha Total” keys
(ref. C, fig. 1) simultaneously and hold them pressed until the display shows the
current parameter value, preceded by letter “C” flashing; then release keys..
Press “+” key (ref. A, fig. 1) to increase or “-” key (ref. C, fig. 1) to decrease the
displayed value, until the desired value (from 20 to 999 pulses / meter) is obtained.
Press “width - PROG.” key (ref. B, fig. 1) for about 1 second to quit programming.
La Picture 4 shows an example of “C” parameter programming.
KEYS TO BE PRESSED
Figure 4
LOGO
1
2
3
4
5
6
7
8
9
10
11
12
PR
O
G
. 2
"
IMP/100M
MCK 1200
