Installation and use
SEEDER MONITOR MCK 1200
13
5. Using the Seeder Control MCK 1200
1. Power on the monitor by pressing the “ON - OFF” key. The instrument will
perform for 1 second a brief test by activating the acoustic alarm and lighting
up all the display segments; after this test, working hours will be displayed for 3
seconds.
2. To reset the totalizators (partial and total area worked in hectares), hold down
the corresponding key until the display views “0.00”.
To reset working hours, hold down any key for about 3 seconds while the display
visualizes working hours (after the initial test operated at the switching on).
After working hours, the monitor displays the rows which are operative as lit
segments. Segments which are off represent rows that are not checked by the
monitor. When a row does not sow regularly, the corresponding display segment
starts flashing and an intermittent audible alarm is given, which will sound for 5
seconds.
To display worked area and working width press the corresponding keys. The
monitor will display again the rows segments after 6 seconds.
RESETTING THE TOTALIZATORS
Figure 2
LOGO
1
2
3
4
5
6
7
8
9
10
11
12
PR
O
G
. 2
"
IMP/100M
MCK 1200
