3
Overview
of the UGW X-series
UGW X-series
Overview of the UGW X-series
18 of 66
TRIPLE-X
The UGW DOUBLE-X is equipped with a 100-BaseT Ethernet port (IP, RJ45), two hardware adapters
and either an RS232 port
or
an RS485 port (MS/TP).
•
LAN – 10/100 MBit Ethernet (RJ45)
•
Power – 12 to 24 V AC/DC
•
Two hardware adapters in the following variants:
LON – KNX, KNX – M-Bus, Profinet – CAN, Profinet – DALI,
Profinet – LON, Profinet – M-Bus, KNX – DALI
Version RS232
•
Same as SINGLE-X
Version RS485
•
Same as SINGLE-X
3.2
Casing and connections
Casing
Metal casing for rail mounting, DIN top hat rail TS35 as per EN60715
Power supply
Pluggable green screw terminals for connecting the power unit:
•
12 to 24 Volt DC or AC wide range input (terminal type: Würth 691 351 500 002)
•
LED for power supply display
Network
10/100 Mbit TP RJ45 socket connector
RS485 or RS232
Pluggable orange-coloured screw terminals for connection of the RS485 or RS232 cable:
•
4-pole Weidmüller socket (type: BLZP 5.08HV/04/180 SN OR BX):
– RS485: Shld (cable shield), GND (signal ground), A-, B+
– RS232: Shld (cable shield), GND (signal ground), RxD, TxD
•
TX and RX LED for display of transmitted and received signals
Other connections
Depending on the hardware adapters included, e.g. KNX, M-Bus, CAN and LON, the UGW will have
other green screw terminals on the front (type: Würth 691 361 300 004). More technical data on the
devices can be found on the corresponding technical data sheets.
