Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Connecting Cisco Analog Video Gateway
Network Modules to the Network
Revised: May 1, 2008, OL-16670-01
This guide describes how to connect Cisco Analog Video Gateway network modules to your network. It
contains the following sections:
•
Information About the EVM-IPVS-16A Network Module, page 1
•
How to Install, Connect, or Replace the EVM-IPVS-16A Network Module, page 5
•
Related Documents, page 12
•
Obtaining Documentation, Obtaining Support, and Security Guidelines, page 13
Information About the EVM-IPVS-16A Network Module
The EVM-IPVS-16A network module enables Cisco integrated services routers to capture analog video
signals. The EVM-IPVS-16A network module supports up to 16 simultaneous composite video inputs,
such as video surveillance cameras. The EVM-IPVS-16A network module
also provides alarm input
detection, control relay outputs, and RS-485 serial communication interfaces.
Figure 1
shows the
EVM-IPVS-16A network module faceplate.
Note
You need a router that supports the EVM-IPVS-16A network module. For a list of supported platforms,
see the
Cisco Analog Video Gateway Network Module (EVM-IPVS-16A) Data Sheet
.
