3
Overview
of the UGW X-series
UGW X-series
Overview of the UGW X-series
17 of 66
•
200 data points
•
500 data points
•
1,000 data points
•
2,500 data points
Web server
With the integrated web server (web interface), you can configure the gateways using a web browser,
save the configuration and call up statistics and documentation. That makes configuring the devices
significantly easier, allowing them to be commissioned more quickly. The web interface also enables
the use of different upgrade options of the gateway, such as activation on up to 2,500 data points or
expansion to include additional communication drivers.
Main functions of the UGW X-series
•
Connection of data points between various supported protocols:
including BACnet, KNX, Modbus, M-Bus, CAN, DALI, KNX, LCN, LON and Profinet
•
Display, creation and editing of data points with the web interface
•
Automation functions (alarms, trend log recording and scheduling) on a data point basis
•
Recording of log files
3.1
Type overview of the UGW X-series
SINGLE-X standard
The UGW SINGLE-X standard is equipped with a 100-BaseT Ethernet port (IP, RJ45) and either an
RS232 port
or
an RS485 port.
•
LAN – 10/100 MBit Ethernet (RJ45)
•
Power – 12 to 24 V AC/DC
Version RS232
•
COM1 – RS232 (RxD, TxD, GND and shield)
•
DIP switch has no function
Version RS485
•
COM1 – RS485 (B+, A-, GND and shield)
•
DIP switch (bias, termination resistance)
DOUBLE-X
The UGW DOUBLE-X is based on the SINGLE-X and is outfitted with an additional protocol hardware
adapter.
•
LAN – 10/100 MBit Ethernet (RJ45)
•
Power – 12 to 24 V AC/DC
•
A hardware adapter:
M-Bus, CAN, KNX, DALI, LCN, LON, X-Link or Profinet
Version RS232
•
Same as SINGLE-X
Version RS485
•
Same as SINGLE-X
