manualshive.com logo in svg

Mazda 6 Facelift 2005, Руководство по обучению, Страница: 50 / 274

Поделиться
Скачать
Mazda 6 Facelift 2005 Скачать руководство пользователя страница 50

Diesel Engines 

Engine 

Oil Dilution Calculation  

• 

The PCM calculates the oil dilution amount based on the duration of the regeneration 
process and the regeneration intervals.  

• 

If the engine oil level reaches a certain limit due to oil dilution, DTC P252F is stored in 
the PCM but no warning light is illuminated. This 

DTC

 (

D

iagnostic 

T

rouble 

C

ode) comes 

up when the regeneration of the DPF has been started multiple times but could never be 
completed due to the driving method (such as frequent short distance driving with low 
engine speed etc.). In this case, check the engine oil level. If the oil level is lower than 
the “X” mark on the dipstick, delete the DTC. In addition, the customer must be informed 
to change the driving method (such as driving the vehicle at middle or high engine 
speeds for a longer distance), so that regeneration of the DPF is enabled. 

• 

If the engine oil performance and engine oil level is approaching the limit due to oil 
dilution, the DPF indicator light flashes and DTC P253F is stored in the PCM. In addition, 
the PCM reduces the fuel injection amount to protect the engine. However, the engine 
could be damaged if the vehicle continues to be driven. In this case, replace the engine 
oil even if the engine oil level is lower than the “X” mark on the dipstick. In addition, the 
customer must be informed to change the driving method (such as driving the vehicle at 
middle or high engine speeds for a longer distance), so that regeneration of the DPF is 
enabled. 

 

01-36 

Service Training Mazda6 Facelift 

Содержание 6 Facelift 2005



















































































































































































































































































Отзывы:

Нет отзывов