Page: 5 of 10
11/5/2012
2.
Route EC harness from mirror to headliner.
a) Route EC harness into groove of wire cover and attach wire cover
to mirror base.
(Fig. 3-2)
(a) Slide upper portion of wire cover up to headliner so the “forks” are
held by the headliner.
(Fig. 3-2)
3.
Route EC harness to driver-side A-pillar.
a) Route EC harness between vehicle headliner and roof to top of
driver-side A-pillar area.
(Fig. 3-3)
4.
Route EC harness down driver-side A-pillar.
a) Route EC harness down A-pillar and begin to secure to the top of
the OE harness with (2) wire ties, as shown.
(Fig. 3-4)
1.
Connect the EC harness to the OEM connector .
a) Locate the 12-pin connector in the driver-side A-pillar, as shown.
(Fig. 4-1)
Fig. 3-2
Fig. 3-4
Wire Ties
Fig. 3-3
Connect EC Harness to Power and Ground
Fig. 4-1
12-pin
Connector
See Wire Tie Procedure on Page 2 for detailed instructions and images
of proper wire tie installation techniques.
!
NOTE
Ensure EC harness does not interfere with airbag operation. Do not
secure wire ties to air bag or sunroof drain tube.
CAUTION
!
