Page: 8 of 10
11/5/2012
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
2
3
4
5
6 7 8 9
1 0 1 1
1 2
1 3
1 4
1.
Adjust compass zone after EC mirror installation.
a) The zone setting is factory preset to zone 8. Refer to Compass
Calibration Zone Map
(Fig. 8-1)
to find the correct compass zone
setting for your geographical location. Same map is in User Guide
as well.
b) To change the zone setting, push and hold the right, compass
display button until a number appears in the display. Press button
repeatedly until desired compass zone number is reached.
1. Calibrate compass.
a) Drive to an open, level area, away from large metallic objects or
structures.
b) Hold the right, compass display button for approximately 9 seconds,
until “C” test appears in the display. Release the right button to
enter the calibration mode.
c) Drive slowly in up to 3 circles until the “C” disappears and a direc-
tional heading is displayed. The compass is now calibrated.
Fig. 8-1
Compass Zone Adjustment (Dealer Install ONLY)
Compass Calibration (Dealer Install ONLY)
