Page: 7 of 10
11/5/2012
1. Reconnect negative battery cable.
2.
Turn the ignition switch to ON.
3.
With the vehicle in a fairly well-lit area, perform the following:
a) Verify the shift light on the bottom of the mirror is on and orange.
b) Verify button images are lit with orange back-lighting.
c) To make sure the auto-dimming feature is on, verify that the green
LED to the left of the center button is on. If it is not on, push the “ ”
button to turn the green LED on.
d) Cover the forward looking photocell on the back of the mirror with a
dark cloth or towel.
(Fig. 6-1)
e) In a few seconds, the mirror will begin to darken.
f) Remove the cover from the forward looking photocell and the mirror
will begin to clear.
g) Verify that either a direction, such as NE, of “C” is displayed in the
display window. If not, ensure the feature is turned ON by pressing
the “ ” button.
4.
Turn the ignition key to the OFF position.
5.
Push each HomeLink
®
button, one at a time, and verify that the LED
indicator to the left of the center button illuminates red. (Fig. 6-2)
6.
Testing is now complete.
1.
Trim excess off all tie wraps.
2. Reinstall in reverse order, all trim pieces removed during installa-
tion.
3.
Place User Guide in vehicle glove-box. (Fig. 7-1)
4. Remove fingerprints, smudges, etc. from mirror.
5.
Verify each reinstalled component for proper fit and function.
Fig. 6-1
Fig. 6-2
Fig. 7-1
Testing
Time to darken will vary with ambient light level.
!
NOTE
If compass remains on, refer to troubleshooting section and recheck
proper wiring installation.
!
NOTE
Installation of Removed Components
Compass
Display
Green
LED
Dark
Cloth
Photocell
HomeLink
®
Buttons
Red LED
User Guide
