Maytag MZD2669KE Series, Инструкция по использованию и уходу за холодильником

Страница: 27 / 96

26
No indicato r li g hts
a r e lit on dispense r
cont r ol
Ice o r wate r a r e
not dispensed
when pads a
r e
p r essed
Ice make r is not
p r oducin g enou g h
ice o r ice is
malfo r med
Ice make r is not
p r oducin g ice
Wate r filte r
indicato r li g ht is
r ed
Verify that freezer d oor is close d . Power is remove d
from the control when freezer d oor is opene d .
Plug in refrigerator.
Replace any blown fuses.
Check circuit breakers for any trippe
d circuits.
Call local power company listing to report outage.
See Sabbath Mode page 12.
Verify that freezer d oor is close d . Power is remove d
from the control when freezer d oor is opene d .
See Dispenser Lock page 12.
At initial use, there is an approximate one- to two-
minute
d elay in d ispensing while the internal water
tank is filling.
Wait 24 hours for ice pro d uction to begin or for ice
maker to restock after emptie d .
Change water filter (see page 13).
Wait 24 hours for ice pro d uction to begin or for ice
maker to restock after emptie d .
Low water pressure can cause valve to leak.
Water pressure must be between 35 to 100 poun
d s
per square inch to function properly. A minimum
pressure of 35 poun
d s per square inch is
recommen d e d for refrigerators with water filters.
Change water filter (see page 13).
Confirm ice maker arm is d own. See Automatic Ice
Maker page 15.
See Connecting the Water Supply pages 4 an d 5.
Turn off water supply an d remove kinks.
If kinks cannot be remove d , replace tubing.
Water pressure must be between 35 to 100 poun d s
per square inch to function properly.
A minimum pressure of 35 poun
d s per square inch is
recommen d e d for refrigerators with water filters.
See Temperature Controls page 7 to a d just controls.
Freezer must be between 0° to 2° F (-18° to -17° C)
to pro
d uce ice.
See Ice Storage Bin page 9.
See Connecting the Water Supply pages 4 an d 5.
Self-piercing an d 3
⁄
16
" sa dd le valves cause low water
pressure an d may clog the line over time. The
manufactu r e r is not r esponsible fo r p r ope r ty dama g e
due to imp r ope r installation o r wate r connection.
If filter is not available, replace with bypass filter.
See
Water Filter page 13.
See Filter Status Indicator Light page 12.
Freezer d oor is not close d .
Refrigerator is not plugge d in.
Fuse is blown, or circuit breaker nee d s to
be reset.
Power outage has occurre d .
Refrigerator is in Sabbath Mo d e (select
mo d els).
Freezer d oor is not close d .
Controls are in lock mo d e (select mo d els).
Water tank is filling.
Ice maker has just been installe d or a
large amount of ice has been use d .
Water filter is clogge d or nee d s to be
change d .
Ice maker has just been installe d or a
large amount of ice has been use d .
Water pressure is too low.
Water filter is clogge d or nee d s to be
change d .
Ice maker arm is up.
Househol d water supply is not reaching
water valve.
Copper tubing has kinks.
Water pressure is too low.
Check freezer temperature.
Ice bin is not installe d properly.
Improper water valve was installe d .
Water filter nee d s to be replace d .
Filter in d icator sensor nee d s to be reset.
PROBLEM POSSIBLE C A USES WH A T TO DO
Ice and Wate r
Troubleshooting
continued…