85
85
18
3
13
ENG
Correct Exit from the Gravity Trainer
Step 1:
Make sure that the locking system is secured. The brake hand lever must be in the position.
Schritt 2:
Pull the fastening lever slightly towards you (1) and push the lock button down (2). The lever is released and can
be pushed forward (3). Carefully exit the device.
Tilting the Gravity Trainer
Once you have safely got into the exerciser and your legs are secure ly fixed, release the brake system by plac
-
ing the hand lever in the position.
As soon as you have reached the desired tilt position and you want to hold it, lock the brake system by moving
the hand lever to the position.
To return to the starting position, release the hand lever by setting the hand lever to and bring the backrest
upright.
Before leaving the unit, secure the locking system again by moving the hand lever to the position.
Brake system unlocked
Brake system locked
Adjustment
Calibrating the brake system
There is a possibility that the brake system will loosen over time.
If this is the case, then recalibrate it by using a Phillips screwdriver, as shown
in the picture, to tighten the fixing screw 1/4 turn clockwise. Now check the
tightness of the brake system again and repeat the process until it locks
properly.
