![MAXXMEE 07001 Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/maxxmee/07001/07001_manual_1746972016.webp)
EN
16
• Regularly remove hair and fl uff from
the nozzles.
The fi lters may lose some of their
colour over time. This is normal
and does not have any adverse
effect on function.
Emptying the Dust Container
1. Press the release button (
18
) of the
dust container (
3
) and pull it out of the
device by the carrying handle (
13
).
2. Hold the dust container over a dustbin.
3. Slide the button (
A
) for opening the
dust container downwards. The bot-
tom (
15
) of the dust container will open
and the dirt will fall out (
Picture H
).
4. Flip the bottom of the dust container
shut again. You must hear it engage
in place.
Cleaning the Dust Container, Cyclone
Insert and HEPA Filter
1. Take the dust container (
3
) out of the
device and empty it (see “Emptying
the Dust Container”).
2. Twist the lid (
17
) of the dust container
anticlockwise towards the
symbol
on the dust container and take off
the lid.
3. Remove the HEPA fi lter (
Picture I
)
from the cyclone insert and pull it out
of the dust container.
4. Tap out the cyclone insert and the
HEPA fi lter and brush off loose dirt
with a soft brush.
The dust container and the HEPA
fi lter can also be cleaned under
running water. However, they must
be completely dry before they are
reinserted!
Assembly
1. Insert the cyclone insert into the dust
container. When you do this, make
sure that the locking lug fi ts in the
corresponding recess in the dust
container.
2. Place the HEPA fi lter on the cyclone
insert. The fi lter holder must be fac-
ing upwards.
3. Place the lid on the dust container so
that the left marker on the lid points
towards the arrow tip on the dust
container. Twist it clockwise towards
the
symbol (
Picture J
).
4. Insert the dust container into the
device (see “Removing / Inserting
the Dust Container”). It must engage
audibly.
Cleaning the Exhaust Air Filter
The exhaust air fi lter (
20
) is located in a
cover on the back of the vacuum cleaner.
1. Press down the locking lug of the
cover and open up the cover at the
same time. Then take off the cover.
2. Remove the exhaust air fi lter from the
cover and tap it out over a dustbin.
Do not wet-clean the exhaust air
fi lter!
3. Brush or wipe out the fi lter compart-
ment if necessary.
4. Insert the exhaust air fi lter into the
cover.
5. Insert the cover and fl ip it shut.
STORAGE
• Hook the fl oor nozzle (
1
) into the
holder (
21
) on the back of the device
(
Picture K
) and collapse the telescopic
tube (
6
).
• Plug the upholstery nozzle (
2
), the
crevice nozzle (
4
) and the brush noz-
zle (
8
) onto the nozzle holder (
9
).