Maxon TE-250C, Руководство по обслуживанию

Страница: 22 / 48

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
22
NOTE:
Before doing the following procedure,
make sure vehicle is parked
on level ground.
PLATFORM & SHACKLES
TOUCH GROUND
FIG. 22-1
PLATFORM EDGE ABOVE
BED LEVEL
FIG. 22-2
1.
Make sure platform is at ground level. Unfold
the platform and fl ipover. As the platform fi rst
touches the ground, shackles and tip of fl ipover
must touch the ground at the same time
(FIG.
22-1)
. If shackles and tip of fl ipover touch the
ground at the same time,
RAISE
platform to bed
height. Tip of fl ipover should be above bed level
(FIG. 22-2)
. If indications are correct in both
cases
(FIGS. 22-1 & 22-2)
, Liftgate is installed
correctly and no adjustment is needed. If indica-
tions are incorrect, continue with instruction
2
.
TABLE 22-1
2.
Make sure platform is still at ground level. If
the shackle is not touching the ground, mea-
sure and compare distance
“A” (FIG. 22-3)
with
TABLE 22-1
to determine the correct
shim. Make shims as needed
(FIG. 22-5)
.
Weld shim as shown in
FIG. 22-4
.
NOTE:
If tip of fl ipover touches fi rst
(FIG.
22-3)
, do instruction
2
. If the shackle
touches fi rst
(FIG. 21-1)
, skip instruc-
tion
2
and do
3
.
RAISE TIP OF
FLIPOVER
THIS DISTANCE “A”
REQUIRED
SHIM
THICKNESS
WELD SIZE
“W”
7/8” 1/16” 1/16”
2” 1/8” 1/8”
3” 3/16” 3/16”
3-15/16” 1/4” 1/4”
SHACKLES DO NOT TOUCH
GROUND
FIG. 22-3
WELDING SHIMS (CURBSIDE SHOWN)
FIG. 22-4
TIP OF
FLIPOVER
SHIM MADE FROM STEEL FLAT
FIG. 22-5
PERIODIC MAINTENANCE
PLATFORM ADJUSTMENT
2-1/4”
1-1/2”
TIP OF FLIPOVER
LEVEL LINE
“A”
(TABLE 22-1)
CENTERED
(TOP EDGES FLUSH)
PLATFORM
SHIM
(TABLE 22-1)
2 PLACES
“W”
(TABLE 22-1)
SHACKLE
(REF)
“W”