Maxon TE-250C, Руководство по обслуживанию

Страница: 23 / 48

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
23
3.
Make sure platform is still at ground
level. If the tip of fl ipover is not touching
the ground, measure and compare dis-
tance
“B” (FIG. 23-1)
with
TABLE 23-1
to determine how much to grind from the
platform stops
(FIG. 23-3)
. Grind correct
amount of metal
(TABLE 23-1)
from plat-
form stop as shown in
FIG. 23-3
.
TABLE 23-1
LOWER TIP OF
FLIPOVER
THIS DISTANCE “B”
GRIND METAL FROM
PLATFORM STOP
7/8” 1/16”
2” 1/8”
3” 3/16”
3-15/16” 1/4”
PLATFORM DOES NOT
TOUCH GROUND
FIG. 23-1
GRINDING PLATFORM STOPS
(CURBSIDE SHOWN)
FIG. 23-3
4. RAISE
the platform to comfortable work
height. Fold fl ipover and platform for access
to platform stops
(FIG. 23-2)
.
PLATFORM RAISED TO WORK HEIGHT
FIG. 23-2
5.
Grind correct amount of metal
(TABLE 23-1)
from platform stop as shown in
FIG. 23-3
.
6.
Unfold fl ipover and platform.
LOWER
plat-
form to the ground. As the platform fi rst
touches the ground, the tip of fl ipover and
shackle should touch at the same time as
shown in
FIG. 22-1
.
PLATFORM
STOP
GRIND HERE
(TABLE 23-1)
TIP OF
FLIPOVER
“B”
(TABLE 23-1)