General Information
About this Document
«EC frameless DT» Installation Manual
mmag | 2021-12 | rel10341
1-3
1
GENERAL INFORMATION
1.1
About this Document
1.1.1
Intended Purpose
The purpose of the present document is to familiarize you with the direct drive «EC frameless DT». It will
highlight the tasks for safe and adequate installation and/or commissioning. Follow the described instruc-
tions …
•
to avoid dangerous situations,
•
to keep installation and/or commissioning time at a minimum,
•
to increase reliability and service life of the described equipment.
1.1.2
Target Audience
The present document is intended for trained and skilled personnel. It conveys information on how to under-
stand and fulfill the respective work and duties.
1.1.3
How to use
Throughout the document, the following notations and codes will be used.
Table 1-1
Notation used
1.1.4
Symbols & Signs
In the course of the present document, the following symbols and signs will be used.
Notation
Meaning
(n)
refers to an item (such as part number, list item, etc.)
denotes “see”, “see also”, “take note of” or “go to”
Color coding
find information on the colors used on page 11
Type
Symbol
Meaning
Safety alert
(typical)
DANGER
Indicates an
imminent hazardous situation
. If not
avoided, it
will result in death or serious injury
.
WARNING
Indicates a
potential hazardous situation
. If not
avoided, it
can result in death or serious injury
.
CAUTION
Indicates a
probable hazardous situation
or calls the
attention to unsafe practices. If not avoided, it
may
result in injury
.
Prohibited
action
(typical)
Indicates a dangerous action. Hence,
you must not
!
Mandatory
action
(typical)
Indicates a mandatory action. Hence,
you must
!
Continued on next page.
