Installation
«EC frameless DT» Installation Manual
mmag | 2021-12 | rel10341
3-11
3
INSTALLATION
The motor’s two main components—stator with electric connections and magnetic rotor—come in
unmounted condition in packaged cases.
Precautions with multiple packaging
Depending on the order volume, several rotors are supplied in the same packaging.
When removing a rotor, you must ensure that the rotors remaining in the packaging are and remain fixed.
Otherwise, they may attract each other magnetically and thus be damaged.
Motor versions with encoder (with optional «TSX MAG») have an additional pilot rotor equipped to the rotor
and the stator carries a built-in encoder module. The four components are paired with each other during the
manufacturing process and thus form a final unit. It is therefore important that you handle and install the
rotor and stator paired.
For motor versions without encoder, rotor and stator are not paired.
Important note on the design
The components for motor versions
with encoder
are matched and paired with each other. Install them in
the paired state.
BESIDES SPECIAL PRECAUTIONS IN RESPECT TO HEALTH AND SAFETY, THE «EC FRAMELESS
DT» MUST BE INSTALLED IN A PARTICULAR AND SPECIFIC WAY. FOR BOTH SAFE AND EASY
INSTALLATION AS WELL AS RELIABLE OPERATION CLOSELY FOLLOW THE BELOW DESCRIBED
INFORMATION IN GIVEN ORDER.
Figure 3-2
Main components
1 Stator
3 Pilot rotor (only in connection with TSX MAG)
2 Rotor
4 TSX MAG encoder (optional)
