«EC frameless DT» Installation Manual
5-26
mmag | 2021-12 | rel10341
DECLARATION OF INCORPORATION
Declaration of Incorporation of partly completed Machinery according to EU Directive 2006/42/EC, Annex II 1B.
Manufacturer
maxon motor ag
Brünigstrasse 220
CH-6072 Sachseln
Switzerland
Authorized representative
to compile the relevant
technical documentation
maxon motor ag
Brünigstrasse 220
CH-6072 Sachseln
Switzerland
Product
EC frameless DT
Direct current electric motor, comprising stator, rotor, and con-
nector cables
The manufacturer declares that the aforementioned product is considered partly completed machinery complying with all
essential requirements of EC Directive 2006/42/EC (Directive on Machinery). It is intended, exclusively, to be incorporated into
machinery or partly completed machinery and therefore does not yet meet all requirements of the Directive on Machinery.
Applied harmonized standards: EN ISO 12100:2010
The special technical documentation according to Annex VII, Part B has been prepared and will be made available to the
national authorities at their request.
The product must not be put into service until the machinery into which the aforementioned product is to be incorporated has
been declared in conformity with the provisions of the Directive on Machinery.
Sachseln, December 17, 2021, on behalf of the manufacturer
Daniel von Wyl
Managing Director maxon motor ag
Dominik Stockmann
Director R&D Motors & Encoders
