Installation
Mechanical Installation
«EC frameless DT» Installation Manual
mmag | 2021-12 | rel10341
3-17
3.3
Mechanical Installation
Recommended procedure
The installation approach that matches your case of application depends on your setup, your actual applica-
tion design, and your specific mounting conditions.
Observe the recommendations and analogously adjust the procedure as to your case of application.
Protect hands and fingers
Put on well-fitting, cut-resistant protective gloves.
Two variants of mounting options are schematically shown below, which must be understood as a general
guide. The actual conditions depend on the respective customer application.
Color coding in
illustrations
For easier differentiation, individual components are shown in color:
1)
Fasten rotor on shaft
Figure 3-3
Mounting the rotor
2)
Position and align the shaft with the housing. Support the shaft.
Figure 3-4
Positioning shaft and housing
WARNING
Pinching and shearing risk
Sudden movement and shift of the rotor can cause serious injuries!
To prevent sudden shift during installation you must keep stator and rotor blocked at all times. Do so by
using a mechanical locking device, a mounting aid, or non-magnetic spacers!
Stator of the «EC frameless DT»
Housing (by customer)
Rotor of the «EC frameless DT»
Shaft (by customer)
